|
- 品牌：德國KAYSEN
- 價格： ￥8900/臺
- 發布日期： 2019-04-10
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 水、污水、化工液體等等 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 磁力 |
| 適用介質 | 水 |
| 是否進口 |
進口氟塑料離心泵(進口離心泵10 ）
KAYSEN凱森氟塑料離心泵概述：
氟料泵顧名思義就是內襯氟塑料的泵，按照其結構形式一般可分為：襯氟離心泵、襯氟磁力泵、襯氟自吸泵。 襯氟泵泵體采用先進的生產工藝以金屬外殼緊襯氟塑料（F46、F4等）制造，泵的承重部分為金屬材料具有機械強度高、耐壓性強、抗機械沖擊力優越等優點；主要過流部件葉輪、 泵蓋等均采用金屬嵌件外包氟塑料一次性高溫模壓而成。在-20℃～150℃溫度條件下長期輸送任意濃度的硫酸、鹽酸、*、硝酸、王水、強堿、強氧化劑等強腐蝕介質而毫不受損。
主要特點：
以F4為代表的氟塑料具有一系列優良的使用特性，耐高溫長期使用溫度達160℃。耐低溫在-100℃以下仍柔軟，耐腐蝕能耐王水和一切切有機溶劑。
一：目前國內生產的內襯氟塑料型耐腐蝕泵（大型泵）如：IHF氟塑料驅動大型磁力泵內襯材、FSB氟塑料離心泵、FZB氟塑料自吸泵及襯氟鋼管等質均為聚全氟代乙丙烯（FEP，簡稱F46）內襯F46泵及具有優良的耐腐蝕性和良好的剛性，并能耐沖擊、耐振動和耐扭曲，已廣泛地應用在石油、化工工業中輸送腐蝕性液體和氣體?？稍谙铝袟l件下使用：溫度-80℃~+160℃，壓力≤16公斤/厘米2，真空范圍（瞬時，常溫）400mmHg柱。在使用過程中，顯出了它特有的性能。
應用及效益例舉如下：
（1）使用性能和耐腐蝕性能優于酚醛膠泥、搪瓷制品，襯玻璃制品和不銹鋼等材料。尤其是使用在強氧化劑存在的場合，使用壽命較上述材料可提高一至數倍，特別指出，它們能經受醚類介質的滲透腐蝕。
（2）能經得起各種腐蝕介質的考驗。在已使用過程的介質中，有溴、苯、甲醛、鹽酸、鹽酸鹽、50%硫酸、12%NaSCN、HSCN、異丙醚、22%NaOH、氯苯水，對苯磺酸、99.5%氯氣、95~90%叔丁基次氯酸鹽、0.51%游離氯、11~12%氯丙醇水溶液（PH=2~3）、氯丙醇、氯丙酮BB一二氯異丙醚、二氯丙烷、 苯、次氯酸、CCL4等。
（3）在各種腐蝕性介質同時存在的情況下，即使160℃左右也可使用。例如，666氯化液中含有苯（ ）、次氯酸、鹽酸等各種腐蝕介質，既有強有機溶劑，又有強的氧化性介質，還有強酸等，除F46，F(xiàn)4以外，難找到一種合適的材料能同時耐這些介質交替或同時腐蝕。
（4）使用后有明顯的經濟效果。
二目前國內生產的全氟（氟塑料合金）型耐腐蝕泵（小型泵）如：CQF氟塑料驅動小型磁力泵，F(xiàn)SB氟塑料離心泵等及其他泵葉輪等配件所用材質均為中國上海中科院專利材料--氟塑料合金（F4與F46及少量添加劑按一定比例混合加工而成）。
氟塑料合金具有無可比擬的耐腐蝕性和機械強度耐沖擊、耐振動、耐扭曲及無毒素分解。
Germany Kaysen imported fluorine plastic centrifugal pump overview:
Fluorine pumps, as the name implies, are pumps lined with fluoroplastics. According to their structural forms, they can be generally divided into: fluorine-lined centrifugal pumps, fluorine-lined magnetic pumps, and fluorine-lined self-priming pumps. The pump body of the lining fluorine pump adopts advanced production technology to manufacture the metal casing tightly lined with fluoroplastic (F46, F4, etc.). The load-bearing part of the pump has the advantages of high mechanical strength, strong pressure resistance and superior mechanical impact resistance. The main over-current component impeller and pump cover are all made of metal inserts and fluoroplastics for one-time high temperature molding. Long-term delivery of any concentration of sulfuric acid, hydrochloric acid, hydrofluoric acid, nitric acid, aqua regia, strong alkali, strong oxidant and other strong corrosive medium at -20 ° C ~ 150 ° C temperature without damage.
main feature:
Fluoroplastics represented by F4 have a series of excellent use characteristics, and the long-term use temperature is 160 °C. The low temperature resistance is still soft below -100 °C, and the corrosion resistance is resistant to aqua regia and all organic solvents.
A: At present, the domestic production of fluoroplastic type corrosion-resistant pumps (large pumps) such as: IHF fluoroplastic drive large magnetic pump lining material, FSB fluoroplastic centrifugal pump, FZB fluoroplastic self-priming pump and lining fluorine steel pipe, etc. It is a F46 pump with polyfluorinated ethylene propylene (FEP, F46 for short) and has excellent corrosion resistance and good rigidity. It can withstand impact, vibration and distortion. It has been widely used in petroleum and chemical industry. Corrosive liquids and gases. Can be used under the following conditions: temperature -80 ° C ~ +160 ° C, pressure ≤ 16 kg / cm 2, vacuum range (instantaneous, normal temperature) 400 mmHg column. In the course of its use, it shows its unique performance.
Examples of applications and benefits are as follows:
(1) The use performance and corrosion resistance are superior to phenolic cement, enamel products, lining glass products and stainless steel. Especially in the presence of strong oxidizing agents, the service life can be increased by one to several times compared with the above materials, in particular, they can withstand the osmotic corrosion of ether media.
(2) It can withstand the test of various corrosive media. In the medium used, there are bromine, benzene, formaldehyde, hydrochloric acid, hydrochloride, 50% sulfuric acid, 12% NaSCN, HSCN, diisopropyl ether, 22% NaOH, chlorobenzene water, p-benzenesulfonic acid, 99.5%. Chlorine, 95~90% t-butyl hypochlorite, 0.51% free chlorine, 11~12% chloropropanol aqueous solution (pH=2~3), chloropropanol, chloroacetone BB-dichloroisopropyl ether, two Chloropropane, benzene, hypochlorous acid, CCL4, etc.
(3) In the case where various corrosive media are present at the same time, it can be used even at around 160 °C. For example, 666 chlorinated solution contains various corrosive media such as benzene ( ), hypochlorous acid, hydrochloric acid, etc., including strong organic solvents, strong oxidizing media, and strong acid, except F46 and F4. It is difficult to find a suitable material that can withstand alternating or simultaneous corrosion of these media.
(4) There is obvious economic effect after use.
2. At present, domestically produced perfluoro(fluoroplastic alloy) type corrosion-resistant pumps (small pumps) such as: CQF fluoroplastic driven small magnetic pump, FSB fluoroplastic centrifugal pump, and other pump impellers and other materials used in the Chinese Academy of Sciences patents Material - Fluoroplastic alloy (F4 and F46 and a small amount of additives are mixed in a certain ratio).
Fluoroplastic alloys have unmatched corrosion resistance and mechanical strength, impact resistance, vibration resistance, distortion resistance and no toxin decomposition.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口氟塑料離心泵(進口離心泵 品牌）
