|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 可用于排送帶固體顆粒及纖維的污水、回流污泥、廢水 |
| 型號 | KS |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 150℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口潛水排污泵
|
|
名稱： |
潛水排污泵 |
|
壓力： |
1.6MPa | |
|
型號： |
GR | |
|
口徑： |
DN25-DN400 | |
|
材質： |
鑄鐵、不銹鋼 |
潛水排污泵
-
質量：從鑄件到產品，實行全過程質量監控，全方位檢測，責任到人！
-
價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！
-
交貨：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！
銷售
圖文
服務
產品介紹產品尺寸產品結構PDF下載訂貨流程服務承諾
KAYSEN凱森進口潛水排污泵
Germany Kaysen imported submersible sewage pump
KAYSEN凱森潛水排污泵概述：
潛水排污泵，是一種機泵一體的下泵潛水電泵，是在凱森先進技術的基礎上，結合國內水泵的使用特點而研制成功的新一代泵類產品。葉輪采用了先進的水力模型設計，并精密鑄造而成，具有節能 、防纏繞、無堵塞等特點。在排送固體顆粒和長纖維垃圾等方面具有獨 果。點葉片或雙葉片葉輪結構，它類似于一截面大小相同的彎管。具有非常好的過流性。配以合理的蝸室，確保了該產品的高過流條件下的高效率。是一種理想的排污電泵。
KAYSEN凱森潛水排污泵特點：
1、采用獨特的單葉片或雙葉片葉輪結構,大大提高了污物通過能力,能有效的通過泵口徑的5倍纖維物質與直徑為泵口徑約50%的固體顆粒。
2、機械密封采用采用新型硬質耐腐的碳化鎢材料，同時將密封改進為雙端面密封，使其長期處于油室內運行,可使泵安全連續運行8000小時以上。
3、整體結構緊湊、體積小、噪聲低、節能 ,檢修方便,無需建泵房,潛入水中即可工作,大大減少工程造價。
4、該泵密封油室內設置有高精度抗干擾漏水檢測傳感器,及定子繞組內預埋了熱敏元件,對水泵電機自動保護。
5、可根據用戶需要配備全自動安全保護控制柜,對泵的漏水、漏電、過載及超溫等進行自動保護,提高了產品的安全性與可靠性。
6、可根據用戶需要配備雙導軌自動耦合安裝系統,它給安裝、維修帶來更大方便,人可不必為此而進入污水坑。
8、能夠在全揚程范圍內使用,而保證電機不會過載。
9、有兩種不同的安裝方式,固定式自動耦合安裝系統、移動式自由安裝系統。
KAYSEN凱森進口潛水排污泵使用條件：
1、介質溫度不超過40℃；介質密度≤1200kg/m3，PH值在5-9范圍之內。
2、運行時不得低于*液位，參見安裝尺寸圖中的“?*液位”(含自動冷卻系統)。▽為為自動冷卻系統時*液位。
3、額定電壓為380V，額定頻率為50Hz。在額定電壓和額定頻率的偏差不大于5%時，電機才能正常運行。
4、通過泵的固體顆粒的*直徑不得大于泵體排出口直徑的50%。
KAYSEN凱森進口潛水排污泵技術參數：
流 量：5-1800m3/h
揚 程：7-60m
口 徑：25-400mm
轉 速：1450-2900r/min
功 率：0.75-75kw
電 壓：380V
密 封：碳化鎢，雙端面密封
材 質：鑄鐵、不銹鋼
連接方式：螺紋，法蘭
KAYSEN凱森進口潛水排污泵主要用途：
潛水排污泵主要用于市政工程、工業建筑、賓館、醫院、人防、礦山等行業，可用于排送帶固體顆粒及各種唱纖維的污水、廢水、雨水和城市生活用水。
Kaysen, Germany Imported submersible sewage pump summary:
The import of non clogging submersible sewage pump referred to as import submersible sewage pump, a pump body pump submersible pump, is based on the introduction of British Green advanced technology, combined with the use of domestic water pump features a new generation of pumps and the successful development of. The impeller adopts the advanced hydraulic model design, and is made of precision casting. It has the characteristics of energy saving, remarkable effect, anti winding and no clogging. It has unique effects on solid particles and long fiber waste. The structure of a point or two blade impeller, similar to a bend of the same size. Has very good over-current. A reasonable volute chamber ensures high efficiency of the product under high flow conditions. The utility model is an ideal sewage discharge pump.
Kaysen, Germany Imported submersible sewage pump characteristic:
1.The use of unique single leaf or double vane impeller structure, greatly improved the passing capacity of dirt, can effectively pump through the caliber of 5 times the fiber material and diameter of the pump diameter of about 50% of solid particles.
2.Mechanical seal adopts new hard corrosion resistant tungsten carbide material, at the same time to improve the seal for double end sealing, so that it is long-term in the oil room running, can make the pump safe and continuous operation for more than 8000 hours.
3.The overall compact structure, small size, low noise, energy-saving effect is remarkable, easy maintenance, no construction of pump room, submerged into the water can work, greatly reducing the cost of construction.
4.The pump is equipped with a high precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat sensitive element to automatically protect the water pump motor.
5.According to user needs equipped with automatic safety control cabinet, the water leakage, leakage, overload and overtemperature, automatic protection, improve the product safety and reliability.
6.According to user needs with double rail automatic coupling installation system, it to installation and maintenance more convenient, people do not have to enter the sewage pit.
8.Can be used in the whole head range, and ensure that the motor will not overload.
9.There are two different installation methods, fixed automatic coupling installation system, mobile free installation system.
Kaysen, Germany Imported submersible sewage pump use condition:
1.The medium temperature is less than 40 ℃; medium density is less than 1200kg/m3, the pH value in the range of 5-9.
2.Operation shall not be lower than the minimum level, see the installation size figure of the "lowest level" status "(including automatic cooling system). As for the automatic cooling system at the lowest level.
3.Rated voltage is 380V, rated frequency is 50Hz. When the deviation of the rated voltage and the rated frequency is not more than 5%, the motor can work normally.
4.The maximum diameter of the solid particles through the pump shall not be greater than 50% of the diameter of the pump outlet.
Kaysen, Germany Imported submersible sewage pump technical parameters:
Flow rate: 5-1800m3/h
Lift: 7-60m
Caliber: 25-400mm
Speed: 1450-2900r/min
Power: 0.75-75kw
Voltage: 380V
Sealing: tungsten carbide, double face seal
Material: cast iron, stainless steel
Connection: thread, flange
Kaysen, Germany Imported submersible sewage pump main use:
The import of submersible sewage pump is mainly used in municipal engineering, industrial buildings, hotels, hospitals, civil air defense, mining and other industries, can be used for discharge of solid particles and fibers sing sewage and waste water and rainwater and the city life water.
KAYSEN中國：
營派閥門有限公司為KAYSEN公司在中國的 ，是中國擁有KAYSEN代理權及銷售權，主要為中國地區客戶提供服務與技術支持，同時，營派人員也積極參與總部技術培訓學習，并不斷掌握產品原理、實際運作、工程技術做為基石，完善對中國地區客戶需求。
關于KAYSEN：
凱森（KAYSEN）國際有限公司是亞太地區流體控制領域的主要生產和供應商之一，公司總部位于克萊福德，擁有一支有經驗的研發隊伍，實行 統一設計，統一標準，在水泵領域內處于*地位。在許多個國家均有生產水泵基地，中國由上海營派閥門負責中國市場各項業務與技術支持中心，同時向中國市場銷售。
凱森（KAYSEN）產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域，以及人們?nèi)粘Ｉ钪小?
凱森（KAYSEN）主要產品有：管道泵、離心泵、隔膜泵、磁力泵、真空泵、潛水泵、排污泵、計量泵、衛生級泵、羅茨風機等系列產品。
服務體系：
KAYSEN品質：
KAYSEN公司注重產品質量及使用壽命，全部采用先進制造技術和生產設備，并堅持不懈研發新產品，為確保不間斷的全過程質量控制，在生產過程中采用(SPC)過程控制和(TQM)全面質量管理；KAYSEN的嚴格規范實現了不讓品質拖節，有效保障產品每個細節達到的性能指標。
KAYSEN專業：
掌握核心的流體控制技術，提供市場*的產品、服務和解決方案，幫助用戶提高效率，帶來至關重要的基礎設施。
KAYSEN服務：
我們與用戶緊密合作，支持一系列系統使用技術和文件報告，提供售前、售中、售后服務和技術支持，有了您的信任與支持，我們將更完善、更高效提供水泵流體技術方案。
KAYSEN china:
Shanghai yingpai Valve Co., Ltd. for KAYSEN company general agent in China, is China with KAYSEN proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
About KAYSEN:
GERMANY KAYSEN International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Yingpai valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
GERMANY KAYSEN products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
GERMANY KAYSEN the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
KAYSEN quality:
KAYSEN company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
KAYSEN major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
KAYSEN service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
